Integrated Presence Sensor LED Driver
Reference: HEC7028
Product ideal for elevator operators
Device consisting of LED driver and motion sensor. It is suitable for all LED sources drived in constant current.
Through the DIP switch you can set the output current.
The main function of this driver is maintaining a constant and adequate light inside the cabin also when the people is inside or the lift shutdown.
An integrated sensor switch on the lamp to 100% when the elevator is running and detects the presence of people, while when it is stationary and doesn't detects any presence automatically the flow drops to 10% - 20% - 30% - 50% according to the setting set.
Ideal product for elevators
DATASHEET
- Voltage: 220- 240 V - 50/60 Hz
- Input current: 0.15 - 0.14A
- Input power: 32.5W
- Warming-up time: 20 s
- Microwave frequency: 5.8GHz +/- 75MHz
- Transmission power: <0,2 mW
- Detection range: Max. ( Øx H) 8m x 5m
- Detection angle: 30° ~ 150°
- Empty load voltage: 60V
- Power factor: >0.9
- Output current: 350/500/550/700/750/900mA
- Operation temperature: Ta: -20°C ~ +50°C
- IP rating: IP20
- Mounting height: max. 5 m
- Certificates: Semko, CB, EMC, CE, R&TTE,SAA
Data sheet
- Detection Angle
- 30°~150°
- Detection Range
- max Ø 8x5 m
- Detection range
- Max. (ØxH): 12m x 6m
- Current
- 0,15-0,14 A
- Output Current
- from 350 to 900 mA
- Dimensions
- 110x49,5x34,7 mm
- Efficiency
- 85% (max)
- Power Factor
- >0,90 C
- Microwave Frequency
- 5,8 GHz +/- 75 MHz
- IP rating
- IP20
- Power
- 32,5 W
- Trasmission Power
- <0,2mW
- Daylight Threshold
- 2/10/50 Lux/ disable
- Operation Temperature
- Ta: -20°C / +50°C
- Warming up Time
- 20 s
- Voltage
- 220-240 V - 50/60 Hz
- Empty load voltage
- 60 V
- Sensor Type
- Presence
Create your account now!
Back to Top